Marco Machine is considered a specialist in wire cut EDM.
We are equipped with the most technologically advanced EDM systems currently available on the world market. These capabilities along with the latest CAD/CAM software give Marco Machine the "edge" in Virginia's EDM Market. We also offer our valued customers the best technical expertise in the process manufacturing of their products.
EDM EQUIPMENT LIST:

1 Mitsubishi MV 2400-S       
       X Axis Travel 23.6"
       Y Axis Travel 15.7"
       Z Axis Open Height 12.2"
       Taper Capability 45�
       Independent U-V Axis for different top & bottom work piece shapes
       Full DNC Capabilities
       .00002" Tolerances
 
1 Mitsubishi DWC 110 HA Wire Cut
       X Axis Travel 11.810"
       Y Axis Travel 17.720"
       Z Axis Open Height 10.280"
       Taper Capability � 12� at 4.0"
       Independent U-V Axis for different top & bottom work piece shapes
       Full DNC Capabilities
       .0002" Tolerances
 
1 Mitsubishi DWC 110-G Wire Cut
       X Axis Travel 11.810"
       Y Axis Travel 17.720"
       Z Axis Open Height 10.280"
       Taper Capability � 12� at 4.0"
       Independent U-V Axis for different top & bottom work piece shapes
       Full DNC Capabilities
       .0002" Tolerances
NOTE:   Open height on this machine can be extended to 15.0" for 2 axis work only.
 
1 Castek - High Speed EDM Drill Machine
        Can drill holes from .1mm (.004") to 6mm (.236") through hardened steel.
 
1 Hansvedt SM-150B RAM-Type EDM
       X Axis Travel 8.0"
       Y Axis Travel 6.0"
       Z Axis Travel 5.0"
       20 AMP Power Supply
 
1 Mitsubishi DWC 90C
       X Axis Travel 9.84"
       Y Axis Travel 11.81"
       Z Axis Open Height 6.300"
       Taper Capability � 12� at 2.36"
       Independent U-V Axis for different top & bottom work piece shapes
       Full DNC Capabilities
       .0002" Tolerances.
 
1 Mitsubishi DWC FX-10
       X Axis Travel 13.77"
       Y Axis Travel 9.84"
       Z Axis Travel 8.66"
 
1 Mitsubishi DWC FX-8 FP60 Sinker
       X Axis Travel 11.81"
       Y Axis Travel 9.84"
       Z Axis Travel 9.84"
 
NOTE:   Maximum work piece dimemsions are not limited to Travels indicated.